15
www.LiteGait.com
1-800-332-9255
16.) Insert loose actuator
cord wires into compartment
below actuator plate.
18.) Position cover over
actuator cable and bolts
securing actuator plate to
base. Cover is secured using
magnets. A slight gap may be
present between actuator
and cover OR base and
cover.
(ONLY APPLICABLE TO
SELECT LITEGAIT MODELS)
19.) Locate battery and
position in base.
NOTE:
Battery
requires
charging of once per week
overnight regardless of use.
22.) LiteGait® is powered by
a rechargeable battery. To
charge remove battery from
base and connect charger to
battery.
23.) Verify the connection of
the power system to the
actuator by pressing the up
and down buttons on the
hand switch.
24.) Carefully remove all
shrink wrap from LiteGait®.
Contact Mobility Research at 1-800-332-9255 Option 1 For
assistance.
15.) Insert bolts and hand
tighten. Make sure while one
person is inserting bolts, the
other is holding the actuator.
Tighten the bolts until snug
using the Allen wrench.
CAUTION: DO NOT over
tighten the bolts.
19.) Position actuator cord
cover,
located
in
the
cardboard box, over actuator
cable and bolts securing
actuator plate to base. Cover
is secured using magnets.
