EPX-410D/420D/430D/810D/820D/830D [
3-4 DMX IN Setting
Press
【
FCN
】
to shift to DMX IN setting, after in
【
DMX
】
to confirm and back to time screen:
Receive DMX signal
Not receive DMX signal
3-5 Delay Time Setting
Delay time is the time between channels to be reacted by the control signal.
For example, if delay time is set as 0.5 second, and EPX
EPX-420D will turn off 1st channel immediately and then turn off 2
turn off 3
rd
channel after 1 second and then turn off 4
The function is to avoid large surge current if all relays activated simultaneously.
STEP-1: On the main page, press
It means the delay time is 0.0 second.
STEP-2: Press
【
▲
】
or
【
▼
】
to change delay time(range from 0.0S~10S)
STEP-3: Press
【
DMX
】
to save or press
3-6 Channel Mode Setting
There are two modes for channel status, shown as below:
Switch Mode
Fade Mode
Switch Mode: only two status, 0 and 100%
Fade Mode: the value can be adjusted from 0 to 100%.
410D/420D/430D/810D/820D/830D [EUM-B]
DMX IN setting, after initialization, turns d-OF. Press
【
▲
】
to confirm and back to time screen:
DMX signal
ot receive DMX signal
Delay Time Setting
channels to be reacted by the control signal.
For example, if delay time is set as 0.5 second, and EPX-420D received a signal to turn off all channels,
420D will turn off 1st channel immediately and then turn off 2
nd
channel after 0.5 second and then
channel after 1 second and then turn off 4
th
channel after 1.5 second.
The function is to avoid large surge current if all relays activated simultaneously.
n the main page, press
【
FUNC
】
eight times to enter delay time setting.
It means the delay time is 0.0 second.
to change delay time(range from 0.0S~10S)
to save or press
【
FCN
】
to cancel.
Channel Mode Setting
There are two modes for channel status, shown as below:
: only two status, 0 and 100%
: the value can be adjusted from 0 to 100%.
8
】
or
【
▼
】
to adjust and
420D received a signal to turn off all channels,
channel after 0.5 second and then
times to enter delay time setting.
