LITE-CHECK VERIFIER TRAILER INSPECTION SYSTEM
SYSTEM COMPONENTS
The VERIFIER Trailer Inspection System ships with the following items:
1 – Lite-Check VERIFIER Trailer Interface
•
1 - 7-way cable with 7-way plugs on both ends
•
2 - 3/8” air lines with gladhands on one end
•
2 - Quick disconnect air connectors (male and female for tester and air lines)
•
1 - Air filter regulator to provide clean 120 PSI air pressure
•
1 - Protective Cover
1 – Lite-Check Tablet with Charger and Cable
Please inspect the shipment when it arrives for any missing or damaged items
Optional Accessories
These additional items are available from LITE-CHECK:
•
Mobile Tester cart (20016)
•
Tire tool (18093)
•
Power supply (18085)
Remember:
Power to the tester must be
regulated
to protect the trailer’s ABS electronics and
ensure consistent tester performance.
Power Warning:
The Lite-Check VERIFIER Trailer Interface monitors the current flow through the
ground circuit to aid in identifying various fault conditions. Care should be taken to ensure that the
Trailer Interface’s power source is not grounded to the trailer being tested. When testing or inspecting
tractor-trailer combination units, DO NOT use the battery on the tractor as a power source for the
VERIFIER Trailer Interface.
5
