Lisun Electronics Inc. [email protected] www.Lisungroup.com
-Page 7 -
Chapter 8 Exception Handling
EXCEPTIONS SOLUTIONS
Startup impossible
1.
Lose power or not.
2.
Turn “OFF” to “ON”.
3.
Check power cord, plug and socket.
Output frequency is
normal, but the voltage
meter and ampere meter
display “0”
1. Turn the power switch to “OFF”.
2. Turn the output voltage-regulating switch to zero.
3. Turn the power switch to “ON”.
Output frequency is
normal, but the voltage
meter and ampere meter
display “0” and alarm tone
sounds
1. Reduce the load current.
2. Activate the switch “RESET”
3. Wait for the machines delayed startup.
4. Repeat previous operations.
Other exceptions excluding
above problems
Please contact the service department of our
company.
Chapter 9 Precautions for Use
The instruments should operate in the specified environments. The installation
environments need to be noticed considering the function and service life of the
instruments:
Protect from rain, humidity, high temperature, over heat or direct sunlight.
The distance between the ventilation hole and surrounding objects should be not
less than 40cm.
Protect from operating in the places with corrosive liquids, gases, dusts,
conductive fibers or mass metal particles.
Protect from operating in the places with vibration or electromagnetic
interference.
Avoid long-term storage and transportation bottom up, and intensive shock is
prohibited.
Precautions during Instrument Use:
Too high or low input voltage (198V-242V) is not allowable. Otherwise the power
module will not work properly, and the protective LED of the power module will
light and the alarm will sound.
