Maintenance and Cleaning
50
Grinding machine SBM-XL 1000/1500 G2S2-60
6.2 Cleaning
The machine must be cleaned after every shift (at least once per day) and
dust removed.
CAUTION
Dust
Long-term damage to health from inhalation
Wear dust protection mask when cleaning the machine
Turn on the exhaust system before cleaning.
Do not blow out the machine with compressed air.
WARNING
Fire hazard from pockets of embers
Burn injuries or damage to the machine
Completely remove dust and pockets of embers
A dust collection container 15 is located under the machine, which can be
pulled out for emptying.
Turn on the exhaust system by turning the selection switch on the
exhaust system in the the »MANUAL« position.
Open doors 4, 7, 8 and 11 and vacuum out the dust with an industrial
vacuum cleaner.
Pull out the dust collection container 15 under the machine by the
handle, empty with industrial vacuum cleaner and push back under the
machine.
Loosen the wing nuts of the inspection cover on the exhaust duct of the
machine, remove cover, clean exhaust duct.
Then refasten the inspection cover.
Set the selection switch on the exhaust system back into the »AUTO«
position.
Empty the dust container of the exhaust system and clean with suitable
agent.
The dust which is removed must be disposed of according to the applicable
regulations.