Operation
34
Grinding machine SBM-XL 1000/1500 G2S2-60
5.5
Setting sheet thickness
Before processing the workpieces, the sheet thickness of the workpieces
must be measured and adjusted on the machine.
The value for the sheet thickness is set commonly for the SBM-G and SBM-
S grinding units. This means the upper feed rollers are moved with the upper
grinding units upward or downward.
Abb. 11:
Setting the sheet thickness
NOTE
Workpieces remaining in the machine
Damage to the machine
Make sure that no workpieces are between the feed rollers or in the
exhaust duct.
To set the sheet thickness, »sheet thickness« must be selected in the
main menu
The measured sheet thickness can be entered via the interface and
confirmed with »ENTER«. Start the positioning with »OK.
The sheet thickness can be incrementally positioned in manual mode.
The grinding units move to the set position. The displays of the
grinding units change accordingly.
Push the »Start system« button 17 only when the positioning cycle is
completely finished.