Lissmac FBM 300 D, Operating Manual

Page: 30 / 42

30/42
5.3. Working with the machine
WARNING
Risk of injury on the rotating tool
Heavy abrasion due to contact with the tool can result.

Do not open or remove the brush protective hood during operation
 Do not reach into the rotating tool

These works may only be carried out with the tool at a standstill and the petrol motor turned off.
NOTICE
The machine may only be put into operation, if all starting preparations
(see Chapter 5.2) are met. If this is not possible, the operation of the machine is prohibited.

Set the machine in work position
Start the petrol motor
 See operating manual of the fuel motor

Place an accelerator for the petrol motor up to the stopper
 Lower the tool in the joint using the crank of the height adjustment

Introduce feed movement via the steering handle