Lisheng DM-R88 User Manual Download Page 4

DMR

 

DIGITAL

 

TWO

 

WAY

 

RADIO

                                                                                                                             

DMR

 

DIGITAL

 

TWO

 

WAY

 

RADIO

 

Battery Information 

Initial Use 

New batteries are not charged fully in the factory. Please charge it before 
using. In general, the battery should charge 4 hours at initial use. The 
maximum battery capacity and performance is achieved after three times 
fully battery charge-discharge cycle. When the battery power runs out, 
please recharge the battery or replace one.   
   

Applicable Battery Pack 

Please only use the battery which specified by the manufacturer. 
Unauthorized batteries may cause the failure of Ex-protection or bodily 
injury and property damages.   
 

Safety Information 

1.  Do not throw the battery into fire! 
2.  Do not abandon the battery as the household garbage, it should be 
recycled and disposed correctly.   
3.  Never attempt to disassemble the battery pack.   
 

Notices: 

◆ 

When charging your battery, please keep the ambient temperature 
among 5

 - 40

.  

◆ 

Please turn off the radio when the battery is charging. Using the radio 
during charging will affect the battery pack to be charged normally.   

◆ 

During charging, do not plug in/pull out the power supply or the battery 
frequently, it would affect battery charging.   

◆ 

Do not charge when the battery or radio is wet. Please dry it with a soft 
cloth before charging.   

◆ 

The battery life is over when the operating time is obviously shorter 
than normal even if it’s fully and correctly charged. Please replace a 
new battery.   

 
 

To Prolong Battery Life 

◆ 

Battery performance will degrade when the current temperature is 
below 0

. A spare battery is necessary in cold weather. Please keep 

the cold batteries, these batteries may work under room temperature.   

◆ 

If the battery contact is dusty, it may influence its normal use or normal 
charge.  

 
Battery Storage 

◆ 

Fully charge a battery before you store it for a long time, to avoid 
battery damage caused by over-discharge. 

◆ 

Recharge the battery after several months’ storage (Li-Ion/Li-polymer 
battery: 6 months, NiMH battery: 3 months), to avoid battery capacity 
reducing caused by over-discharge. 

◆ 

When storing your battery, keep it in a cool and dry place under room 
temperature. 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for DM-R88
















Reviews: