Step-By-Step Installation Instructions
4
STEP 8
– WATER FLOW CONTROL
Adjust the rate of water flow to your bubbler by
turning the ball valve handle on the valve assembly
until the desired flow is obtained. The valve is “open”
when the colored handle is parallel to the manifold
pipe, and is “closed” when the colored handle is
perpendicular to the manifold pipe. Your rock
will come with a small insert located in the top.
A
djust up or down for desired water head height.
STEP 9
– FINISHING LANDSCAPE TOUCHES
Your fountain is now ready for the final touches of landscape design. Start
by covering your polymesh screen with river rock or other decorative rock
products. There are many styles and colors available, and these can be
found at any rock yard, as well as most major home improvement stores.
Avoid placing soil or bark on top of the polymesh screen, because it may fall
through the screen and into the water inside the reservoir.
If you’d like to put flowers or decorative plants on top of your fountain base,
we suggest using the LiquidArt matching rock accent planter (accessories
page). It’s made with the same GFRC process as our rocks, and the colors and
textures will match your LiquidArt bubblers.
