Operating instructions
4point light 10W (V 4.58)
Page 57 of 130
G
M
L
7. The instrument waits for an open circuit (lifting of the electrodes)
8. The instrument waits until the circuit is closed again (placing the electrodes)
9. The instrument waits 100 msec (debouncing)
10. One step increment of current
11. Measurement is performed. The instrument checks if the input voltage is high
enough and if the circuit is still closed.
12. At the end of a measurement an acoustic signal sounds
13. Coordinates are incremented.
If the circuit is not closed, the measurement will be restarted.
Further measurements
