TME-EPIC-HURPM-R1V5.doc
Rev 1.5
Page 28 of 41
3.17
CPU Fan Supply
Connector Type: HIROSE-DF13-3PIN-1M25-S (X12)
PIN
Signal
1
Speed Signal from fan (yellow)
2 +5VDC
(red)
3 GND
(black)
Current at +5VDC output: max.500mA
3.18
Supervisory Connector
The Hurricane-PM provides a 15-pin Supervisory Connector on its bottom side. The table below
shows the assignment of the different signals.
(The secondary functions are available only with customized versions. Please ask for a quotation)
Connector type: Hirose DF13 15-pin
Matching plug: Hirose DF13-15S-1.25C
Pin assignment:
Note The +3.3V and +5V are generated by an on-board DC-DC converter. It
must be not used to supply power to any peripherals with high power
consumption.
Pin
Primary
Secondary
1
+5V (max.25mA)
+5V (max.25mA)
2
+3.3V (max.40mA)
+3.3V (max.40mA)
3
WD-LED signal
WD-LED signal
4
LIVE-LED signal#
LIVE-LED signal#
5
IDE-LED signal
IDE-LED signal
6
PWRON-LED signal
PWRON-LED signal
7
FAN pulse (out)
PCI_PME#
8 SMB
CLOCK
GPIO21
9 SMB
DATA
GPIO22
10 EXTSMI#
GPIO23
11 SERIRQ
GPIO24
12
First LAN (X23) Speed LED
GPIO25
13
First LAN (X23) Active LED
GPIO26
14
First LAN (X23) Link LED
GPIO27
15 GND
GND
