background image

Rev: 05.10.2021

Page 6

CCD-0004280

Fig. 10 

Fig. 11 

Ladder

Hooks

Utilizing the Bed

The Vela Pop Up Roof System comes equipped with a 1300 mm x 2000 mm double bed (Fig. 10). 

1. 

Attach the supplied ladder to the two hooks (Fig. 11).

2. 

Climb the ladder to the bed, sit on the surface of the sleeping area, then rotate your torso.

Closing the Pop Up Roof System

1. 

Attach the supplied ladder on the hooks (Fig. 11).

2. 

Climb the ladder to inspect the pop up roof to make sure the windows are properly closed. If 

necessary, zip the windows closed.

3. 

After making sure all windows are closed, grip both roof handles (Fig. 12) and pull down as evenly as 

possible. Do 

NOT

 completely close the pop up roof at this point.

4. 

Make sure that the canvas is folded correctly inside to prevent jamming of the built-in mechanism or 

the locking latch.

5. 

Walk around the vehicle and visually inspect the pop up roof for any canvas material sticking out of the 

frame. If necessary, carefully tuck in any protruding material.

6. 

From inside the vehicle, continue to lower the roof until it is completely closed.

Note:  

A clicking sound should be heard, signifying the locking system has engaged.

7. 

To make sure the pop up's locking system has been engaged:

A.  Grab the handles on the roof with both hands and push upward.

B.  If the upward pressure on the roof does not change its position significantly on both sides, then 

the locking system is properly engaged.

Fig. 12 

Handles

Summary of Contents for Vela













Reviews: