TME-ITX-GM45-R1V1
Rev 1.1
Page 12 of 31
Display Backlight Connector
Connector type: Hirose DF13 8 Pin (X25)
Display Voltage Selector
Jumper X11, Location is top near X18 (SYSTEM PANEL CONNECTOR).
Connector type: IDC6 jumper 2.00 mm.
Use a jumper between 1-3 or 3-5 to select the backlight voltage.
Use a jumper between 2-4 or 4-6 to select the display voltage.
Default setup
is 3,3V for LVDS display and 12V for the inverter.
Pin Direction Signal
1
Output
+12 V DC, max. 1A
2
Output
+12 V DC, max. 1A
3
Output
+5 V DC, max. 1A
4
Output
+5 V DC, max. 1A
5
Output
Signal: Backlight enable (level: 3.3 V)
6
Output
Switched Inverter Power, max. 1A (refer
to “Display Voltage Selector” below)
7
GND
8
GND
Pin
Signal name
Pin
Signal name
1
+3,3V DC
2
+12V DC
3
Display voltage
4
Backlight voltage
5
+5V DC
6
+5V DC
X
2
5
X11
X18
2 1
