Lippert Components Bed Lift, Assembly And Operation Manual

Page: 8 / 24

Rev: 11.19.20
Page 8
CCD-0002764
14. Insert the ACS module (Fig. 7B) into the ACS module holder (Fig. 7A). Make sure the ACS module key
(Fig. 7C) is aligned with the ACS module keyway (Fig. 7D) in the ACS module holder. Push and turn the ACS
module (Fig. 7B) until ACS module seats into place.
15.
To hold the ACS module into the ACS module holder, install one #6 x 1/2", 18-8 SST, pan head screw into
the ACS module holder (Fig. 6H).
Fig. 7
A
B
C
D
16. If not already installed, install two 2.9 mm x 9.5 mm screws (Fig. 6J) one on each side of the ACS module
holder (Fig. 6K) holding the two halves of the ACS module holder together.
17.
Slide the ACS module holder (Fig. 8B) underneath the angle support bracket (Fig. 8A). Align the angle
support bracket holes with the ACS module holder. Attach with two screws 2.9 mm x 9.5 mm (Fig. 8C) to
hold the ACS module holder to the angle bracket.
Fig. 8
A
B
C