background image

Operator manual Konstanz  STG/ASA                         13/20                                 Version 8.0    (01/2010)

4.5.1

The automatic platform

With  the  automatic  platform,  the  floor  folds  up  or  down  electrically  as  well  as  the 
safety gates fold up and down electrically. This occurs by means of an UP or DOWN 
command from (

see also  item 4.5

), or via the internal controls for special design 2. 

The  command  must  be  held  down  (so-called  inching  operation)  until  the  folding 
process is ended.
If  a  malfunction  is  present  during  the  folding  process,  then  the  platform  must  be 
folded together or unfolded manually (

see item 4.5

.

2

) and customer service must be 

informed.

4.5.2

The manual platform 

The folding process on a step may only be carried out by an assistant.

In order to fold down the platform manually, one should proceed as follows):
a) Bring the safety gates into a horizontal position.
b) Fold up the platform floors.
c) Fold the safety gates downwards, against the platform floor.
The  respective  gate  on  the  lower  floor  is  accordingly  designed  longer,  in  order  to 
enable safe operation.

In  order  to  unfold  the  platform  again,  one  should  proceed  in  reverse  order  and  in 
conclusion fold up the safety gate of the desired access point to a completely upright 
(vertical) position.

Summary of Contents for Konstanz





















Reviews: