Operating
instructions
Weed
Extractor
WED
90/110/125/155
19 - 24
04.11.2004 / 01
10. Maintenance
Steps to be carried out in order to maintain the machine in good
working condition:
•
Check the correct connection of the universal joint shaft and the
safety devices.
•
Lubricate the universal joint shaft (see Fig. 5) before start-up and
every 8 operating hours with proprietary grease and check the
smooth run of the sliding profiles. In winter, the protective tubes
have to be greased additionally in order to avoid freezing.
•
Check the level of liquid grease in the gear casing via the
corresponding plug (Fig. 10). This operation must be carried out
with the machine in horizontal position and after the machine has
already been running for a few minutes, thus warming the grease
and distributing it evenly. Then check the grease level with a
dipstick (grease level should be 2.5 cm). If necessary, top up
lubricating grease.
Fig. 10
Oil plug