Instructions
Sowing Machine SMD 100/110/120/140..MA
7 - 20
Design: [email protected]
6. Accident prevention
Most accidents that occur during work, maintenance or transport of a
machine are due to non-observance of the most elementary rules of
accident prevention.
It is, therefore, necessary that all licensed users (relatives, employees,
colleagues) read and observe the rules given below and written on the
adhesive labels of the machine itself:
•
Before starting the machine and the tractor, check road and
operating safety!
•
Before starting any work on the machine, it should be placed on
level ground! When working with the unit lifted, always ensure
mechanical protection by means of adequate supporting
elements! Turn off the engine and pull the ignition key.
•
In order to achieve the highest possible performance of the
LIPCO
Sowing Machine SMD
, it must always be in perfect condition.
Maintenance or repairs must be carried out by trained persons
only. Spare parts must at least comply with the technical
requirements specified by the manufacturer! This is only
guaranteed for
LIPCO original spare parts
!
•
Switch off the tractor and pull the ignition key before making any
adjustments, carrying out maintenance or cleaning!
•
Before each use, fixtures, nuts and screws must be checked to
ensure they are firmly tightened!
•
Before attaching the unit to and removing it from the three-point
suspension, place the operating device of the tractor in the
position in which unintentional lifting or lowering is excluded!
•
Before starting up, please make sure that no people or animals
are in the vicinity!
•
Do not leave the machine running without supervision!
•
During service or repair work, make sure that no one can start up
the machine accidentally!
Summary of Contents for SMD 100 MA
Page 20: ...20 20 Design mail bauer ib com...
