Instructions
Sowing Machine SMD 100/110/120/140..MA
14 - 20
100900-03-EN BA SMD 100_110_120_140 MA / 24.01.2020
12. Determining the seed quantity
•
When working on the lifted unit, always ensure mechanical
protection by means of adequate supporting elements!
Switch off the engine and pull the ignition key.
•
Before starting the adjustment, the roller should be turned 1-
2 with closed slide, so that the seeds are distributed evenly
on the inner side of the slide.
•
Put a suitable container or a film under the unit.
•
Open the slide.
•
Rotate the roller by 1 turn.
•
Weigh the seed and determine the seed quantity using the
conversion factor.
•
Adjust the dosage using the dosage disc.
•
If necessary, repeat the process and change the slide
position.
13. Calculation of the seeding quantity for 1 m²:
(*
The
conversion
factor
results
from
the
relation
between roller circumference
and hopper width)
Example:
Weighed amount of seed with one turn of the roller of the attachment
unit x conversion factor from the table = actual amount applied per
m².
Type:
Conversion factor
SMD 100 MA
1.06*
SMD 110 MA
0.97*
SMD 120 MA
0.88*
SMD 140 MA
0.76*
Summary of Contents for SMD 100 MA
Page 20: ...20 20 Design mail bauer ib com...
