![background image](http://html1.mh-extra.com/html/lipco/me-104-l-series/me-104-l-series_translation-of-the-original-instructions_1927000018.webp)
Instructions
Flail mower ME 70/80/90/104/120/140..L
18 - 40
110725-E-03-EN BA ME-70-80-90-104-120-140-L / 05/11/2019
9.2. Blow bar adjustment
•
The length of the mulch material can be influenced by the posi-
tion of the blow bar. This can be done by positioning the blow bar
closer or more far off the cutting blades
To adjust the blow bar, loosen
the lock nuts on the top of the
machine.
After moving the blow bar in-
side the machine to the desired
position, tighten the lock nuts
on top of the machine firmly
again
.
Fig. 8
Blow bar inside the machine
Fig. 9
•
Make sure when replacing the blow bar to the correct position,
that the bended side of the blow bar is directed to the cutter
blades - see Figure 9
•
Check the blow bar regularly for damage.
Replace a damaged blow bar as it may adversely affect the cut-
ting results.
Summary of Contents for ME 104 L Series
Page 40: ...40 40 Design mail bauer ib com...