Instructions
Flail mower ME 70/80/90/104/120/140..L
13 - 40
110725-E-03-EN BA ME-70-80-90-104-120-140-L / 05/11/2019
8. Connection to engine-driven machine
We suggest that before attaching the drive flange (Fig. 1 Ref A), to
apply machine grease to the outer diameter of the machine flange
(Fig. 1 Ref B).
Attach then the drive flange using the two set screws (Fig. 1 Ref C)
and the lock nuts on.
Attach drive flange as follows:
•
Adjust both threaded pins with attached drive flange to a dis-
tance of approx. 5 mm to the machine flange (Fig. 1 Ref B).
•
Check if after tightening the two lock nuts the drive flange can
swivel free and without blocking.
•
Make sure,
that the
gearing of the
LIPCO ME
correctly engages
the
PTO
gearing
of the drive and
the drive flange
is
centrally
ap-
plied
to the motor
unit.
•
Then
secure the connection
between the equipment and
the
prime mover
.
•
Before starting to work lubricate
the drive flange
on the two
grease nipples
.
(
Fig. 1 Ref
D).
Abb. 1
Summary of Contents for ME 104 L Series
Page 40: ...40 40 Design mail bauer ib com...