6
Figure 1 – Speaker & baffle with mounting options
If possible, mounting options that direct the sound downward will give the best
results. Ensure that there are plenty of holes in front of the speaker to enable sounds
to be radiated outward. With other mounting options, ensure that there is an
opening in the shell, such as open windows.
Carefully install the speaker in the baffle, ensuring that wires are routed through the
cut-out and will not be pinched. Snap the speaker into the baffle by applying
pressure on the rim of the speaker only.
2.
After test fitting the Railsounds Commander & Railsounds Audio Board together,
carefully unplug the Railsounds Audio Board and set it aside before permanently
mounting the Railsounds Commander circuit board. Refer to Figure 2 and, when
ready, use two layers of double stick tape 1 ½ inches by 1 inch to mount the
Railsounds Commander circuit board.
