15
Final Assembly
1.
Locate the Railsounds Audio board and, while referring to Figure 12, gently place it
on the double row of pins on the Railsounds Commander circuit board. Take care
to ensure that the Railsounds Audio board is properly aligned with all the pins before
pressing into place.
Figure 12 – Railsounds Audio board installed
2.
Locate the provided cable ties and, while referring to Figure 13, use them to secure
the chassis wiring. Wires should be positioned so they will not be pinched between
the chassis and shell or other parts. Avoid placing wires where they will be directly
in front of windows for a better appearance. When complete, cut the cable ties to
remove any excess length.
Figure 13 – Installation complete
