17
Addendum 1
Interconnecting Railsounds Commander
And Cruise Commander V 3.4
If interfacing a Railsounds Commander and a Cruise Commander, refer to Figure 1
and locate the Cruise Commander board version information. If the Cruise
Commander is board version 3.4 or earlier then follow the instructions below. This
Addendum does not apply to Cruise Commander boards that are version 4.0 and
later.
Figure 1 – Cruise Commander circuit board
1.
Interconnecting the Railsounds Commander and a Cruise Commander, board version
3.4 or earlier (like the one shown in Figure 1), requires a special buffer cable assembly
as shown in Figure 2.
Figure 2 – Buffer cable assembly
