Track Layout
4
Joining the track sections
J
oin the track sections together
by inserting the pins of one track section
into the rail openings of another. For good
electrical contact, pins must be carefully
inserted and track joints tightly fitted.
If the track is difficult to connect, try this
installation tip. You can “break in” O Gauge
track sections by inserting and withdrawing
a track pin into one rail at a time before
joining the entire track section.
If the openings become too large (causing
the track to fit loosely), pinch the rail
together around a track pin with a pair of
pliers. If any pins fall out of the track and
are missing, replace them with extras, avail-
able from your Lionel dealer.
Maintenance tip: The rails should be kept
clean, dry, and free from oil and grease.
Clean rust and dirt spots with a track eraser.
Wipe the track using a cloth dampened with
track cleaner from the Lionel maintenance
kit (no. 6-62927), available from your near-
est Lionel Authorized Service Center.
Summary of Contents for New Haven Command Ready-To-Run O Gauge Set
Page 7: ...Notes 7...
