6
Installing AAA batteries into the Remote Control
F
or safety purposes, you must use a Phillips screwdriver to access the battery compartment. Use a
Phillips screwdriver to remove the screw that secures the battery compartment hatch and lift the
hatch to access the battery compartment (as shown in Figure 2). Insert three AAA alkaline batteries
orienting the +/- as shown in the bottom of the battery compartment. Replace the battery door and
tighten the Philips head screw. Be careful to avoid overtightening the screw.
Use only Alkaline AAA batteries. Use only new batteries. Never mix new and used
batteries or use different types together.
Figure 2. Opening and closing the battery compartment
When you are not operating the train, move the On/Off switch to the
Off position to conserve the battery life.
Important
!
Important!
Remove screw and remove
battery compartment hatch
Important
!
REMOVE ALL BATTERIES WHEN THE TRAIN WILL NOT BE USED FOR AN
EXTENDED PERIOD OF TIME. LIONEL'S LIMITED WARRANTY DOES NOT
COVER DAMAGE TO YOUR REMOTE CAUSED FROM LEAKING BATTERIES.
The FlyerChief™ remote
