Assigning a new ID# to your locomotives
A
s your roster of TrainMaster Command Control-equipped locomotives grows, you
will want to give each unit a unique ID#. The locomotive will respond to commands
associated with its ID# while all other units will disregard these commands.
To restore your locomotive’s functions, see page 21.
1. Slide the Command reverse unit switch on your locomotives to the PGM position. See pages
12, 36, and 37 for the location of the Command Reverse Unit switch on each unit.
Work with only one locomotive at a time.
2. Place the locomotive on the track.
3. Connect the Command Base and plug it in.
4. Power up the track.
5. Press
ENG
.
6. Enter the unique ID#. Choose any number from 1 to 99 that has not been assigned to
another locomotive (
ENG
). We recommend using a part of your locomotive’s cab number.
7. Press
SET
. The locomotive’s horn will sound or the headlights will flash.
8. Slide the Command reverse unit switch back to the RUN position.
The locomotive’s ID# has been set. Be sure to record the new ID# for your reference.
Note!
1
TrainMaster Command Control operations
Note!
