10
2.2.1.1 Connecting Attachments
The Drill/Reamer Handpiece has a combination
collet which will accept all the illustrated shank
styles below, without the need for an adaptor.
AO shanked products (not pictured) may also be
used with the Drill/Reamer Handpiece, utilizing
the Zimmer to AO Adaptor.
Trinkle shank accessories must utilize the
Zimmer to Trinkle adaptor. Affix the Trinkle
adaptor into the Zimmer/Hudson snap-lock
chuck as described in step 1.
AO Shank accessories must utilize the AO
adaptor. Affix the AO adaptor into the Zimmer/
Hudson snap-lock chuck as described in step 1.
1.
To connect attachments:
(a) Place the Direction Control Knob in
the “SAFE” position.
(b) Firmly grasp the chuck and pull back
toward the handpiece.
When inserting Trinkle or AO
products, care should be taken to pull
back on the adaptor itself, not the
handpiece snap-lock chuck.
(c) Insert the shank of the attachment into
the chuck, then release the chuck.
NOTE:
Be certain the Trinkle or AO
Adapter is properly seated. When properly
affixed, the inner housing will be flush with
the outer housing.
