14
2.2.2.2 Rotating Head Instructions
1.
The rotating head may be set in any of 12
positions at 30˚ intervals for appropriate
surgical access. To change positions and
cutting planes:
(a) Grasp the head locking collar firmly
and pull towards the back of the
handpiece.
(b) Rotate the head and blade to the
desired position. Release the head
locking collar.
2.2.2.3 Operating Instructions
1.
To operate the handpiece:
(a) Twist the control knob from the
“SAFE” position to the “ON” position:
(b) Depress the activation trigger.
