Copyright © 2016 Lintest Systems, LLC – All rights reserved 11/27/2016
PiCapture HD1 Specifications
PiCapture HD1
Compatibility
Raspberry Pi 1 A+,B+
Requires 40 pin GPIO connector
Raspberry Pi 2
Raspberry Pi 3
Physical Dimensions
65mm x 56.5mm
HAT form factor
Interface connectors
40 pin GPIO connector
Pass-through header is provided
CSI-2 MIPI camera
connector
Power Requirements
5V @ 300 mA
Supplied by Raspberry Pi
Supported Video
Formats
480p
640x480 – Camera Mode 6
720p
1296x730 – Camera Mode 5
1080p
1920x1080 – Camera Mode 1
Video Inputs
HDMI
YPbPr Component
Input Connectors
1 HDMI
Standard HDMI connector
3 RCA/Phono
For component video
Status Indicators
Red “ACTIVE” LED
“Camera active” indicator (same as Raspberry Pi camera)
Green “RUN” LED
PiCapture Ready indicator
Blue “READY” LED
Video Active indicator
Yellow “PGM” LED
Programming / PiVideo Control Active Indicator
4 Green “FORMAT” LEDs
PiCapture Video Processor source type / status
Configuration Jumpers
UART Select (2x2)
Remove to disconnect from serial port
I2C Select (3x2)
Select I2C port, or remove to disconnect from both I2C
ports
Included Accessories
CSI-2 MIPI interface cable
Mounting hardware
Spacers and screws for securing the PiCapture board
Software
PiVideo control software
Used to manage the PiCapture video processor
