Shenzhen Linshang Technology Co., Ltd
7-29-2020 Page 7 of 8
4) When the device identifies the ferrous putty, the buzzer alerts for two times. And the interface of the
device will prompt: “Ferrous putty”. When the device identifies the galvanized iron, it will turn on the
green backlight. The substrate is displayed as “FeZn”.
5. Check measurement records
In measurement mode, short press the button to check historical data. The gauge stores 9 sets of data.
When more than 9 sets of data are stored, the earliest recorded value is automatically deleted, and No.1
is the last test data. Recorded data will not loss after powering off.
V. Attentions
1. The device must be zero adjusted respectively with the iron-base and aluminum-base zero adjustment
plates. Otherwise, there may be abnormal identifications of the ferrous putty and galvanized iron
substrate.
2. Do not slide the probe on the automotive surface, which will result in damage to the paint and the
gauge.
3. Please keep the automotive paint surface clean, the dust and dirt on the paint surface will affect the
measurement accuracy.
4. When the gauge displays low battery, the battery needs to be replaced.
VI. Packing list
No.
Description
Quantity
Unit
1
Coating thickness gauge
1
Set
2
Fe zero-adjustment plate
1
pcs
3
NFe zero-adjustment plate
1
pcs
4
Standard film
1
pcs
5
User manual
1
pcs
6
Drawstring bag
1
pcs
7
Certificate / Warranty card
1
pcs
8
1.5V AAA alkaline battery
2
pcs
