Shenzhen Linshang Technology Co., Ltd
7-29-2020 Page 2 of 8
I. Product introduction
Coating thickness gauge is used for measuring the thickness of
automobile paint. The automotive body shell consist of metal materials
such as iron and aluminum and other non-metallic materials such as
carbon fiber and plastic. This coating thickness gauge can measure the
thickness of car paint on iron and aluminum materials. Moreover, it can
identify not only non-metal car bodies, but also the ferrous putty layer as
well as the galvanized iron. This coating thickness gauge uses low
temperature resistant OLED as the display interface to ensure that the
display is still normal in the low temperature environment of -40
℃
.
Standards for the product:
DIN EN ISO 2808 Paints and Varnishes-Determination of Film
Thickness
JJG-818-2005 Verification Regulation of Magnetic and Eddy
Current Measuring Instrument for Coating Thickness
GB/T 4956-2003 Non-magnetic Coatings on Magnetic Substrates-Measurement of Coating
Thickness-Magnetic Method
GB/T 4957-2003 Non-conductive Coatings on Non-magnetic Basis Metals-Measurement of
Coating Thickness-Eddy Current
II. Technical parameters
Probe tip
Ruby
Measuring principle
Fe: Hall Effect / NFe: Eddy Current
Probe type
Built-in integrated probe
Measuring range
0.0-2000μm
Resolution
0.1μm:(0μm - 99.9μm)
1μm:(100μm - 999μm)
0.01mm:(1.00mm - 2.00mm)
Accuracy
≤±(3% 2μm)
Unit
μm / mil
Measuring interval
0.5s
Minimum measuring area
Ø = 25mm
