![background image](http://html1.mh-extra.com/html/linn/mimik/mimik_owners-manual_1925515018.webp)
12
The last two functions are used least often and require pressing two
adjacent keys at the same time and holding them.
PROGRAMMING
TO PLAY A SELECTION OF TRACKS
make sure the disc is loaded but
not playing. You can tell that this is the case if the
w
indicator is not
lit and the display is showing the number of tracks on the disc. (If you
have just put the disc in, allow the MIMIK the few seconds necessary
to read and display the number of tracks.) Press and hold the pair of
keys marked
PROGRAM
for about 2 seconds until the display shows
P - - A
which indicates that programming mode A has been entered. (If the
display shows "P--b" you've held
PROGRAM
too long. Press
OPEN
twice,
and start again). Release
PROGRAM
and the display will show
P 00
which indicates that the MIMIK is ready for you to enter your selection.
Use the
SKIP
i
or
u
SKIP
keys to enter a track number, or use the
remote control to enter a track number directly. Press
PROGRAM
again
to enter this track as your selection. The display will show
P 01
indicating that your first selection has been accepted. Enter further
track numbers the same way, pressing
PROGRAM
to store each track in
sequence. You can enter up to 20 tracks.
The display will show P 02, P 03 ... and so on as each track is
programmed in.
TO FINISH THE PROGRAM
press
STOP
o
. The display will show the
total number of tracks you have entered.
Summary of Contents for MIMIK
