![background image](http://html1.mh-extra.com/html/linn/mimik/mimik_owners-manual_1925515012.webp)
6
CONNECTIONS
Connect your MIMIK to a mains supply using the supplied mains cord.
Turn it on to see it light up!
Now you know it works, you have to connect it up to everything else,
so turn it off again. All the connections are made at the rear panel, as
illustrated above.
WARNING: THE MIMIK MUST BE SWITCHED OFF BEFORE
CONNECTING OR DISCONNECTING ANY OF THE PLUGS ON
THE REAR PANEL.
CONNECTING TO YOUR AMPLIFIER
There are two sets of
AUDIO OUTPUTS
on
the back of the MIMIK. One is for you
to connect to the amplifier or pre-amplifier
in your primary system, and the second is
for connection to a subsidiary system or a
Linn multi-room system. Connect your
MIMIK to the CD inputs of your amplifier
using the interconnect cable supplied.
Ensure that the left (upper) channel
of the MIMIK is connected
to the left input channel of your amplifier, and
the right (lower) channel of the MIMIK is
connected to the right input
channel of your amplifier.
Summary of Contents for MIMIK
