Linn MIMIK, Owner'S Manual

Page: 17 / 27

11
The next group of functions, which are less commonly used, require
pressing two adjacent keys at the same time. These functions are
printed in dark grey on the pairs of keys involved.
t
SEARCH SEARCH
y
TO SEARCH A DISC
press and hold either the pair of keys marked
SEARCH
y
to search forward, or the pair of keys marked
t
SEARCH
to search backwards. The search is executed at two speeds; for the
first four seconds it is slow and thereafter it is faster. You will hear the
music accelerated accordingly. When searching backwards during
play, if the start of the first track is reached the disc will start to play.
DISPLAY
TO CHANGE THE DISPLAY MODE press the pair of keys marked
DISPLAY
. If a disc is playing or paused, the display mode will advance
with each press through the following cycle:
TRACK, TRACK TIME,
REMAIN TRACK TIME, TOTAL TIME, TOTAL REMAIN TIME
. If a disc is
loaded, but not playing or paused, then
DISPLAY
will toggle the display
between showing the total number of tracks on the disc, or the total
time. The current display mode is indicated at the left of the display.
REPEAT
TO REPEAT THE ENTIRE DISC press the pair of keys marked
REPEAT.
You must release
REPEAT
within 0.5 seconds. The
REPEAT
indicator
will light when you release
REPEAT
and the disc will repeat when it
gets to the end. To cancel this repeat press
REPEAT
twice more. The
REPEAT
light will go out, and the disc will stop at the end.
TO REPEAT A SECTION OF THE DISC advance to the start of the
section you wish to repeat using the
SKIP
or
SEARCH
keys and then
press and release
REPEAT
. The
REPEAT
indicator will light when you
release the
REPEAT
key. Use
SKIP
or
SEARCH
to get to the end of the
section you wish to repeat and then press
REPEAT
again. This section
of the disc will be repeated. To cancel this repeat press
REPEAT
once.
The
REPEAT
indicator will go out when you release
REPEAT
, and the
disc will finish playing at the end.