LinMot P10-70-SSC Series Installation Manual Download Page 28

Page: 28 / 32

Installation Guide Linear Motors

ENG

Page 28 / 32

P10-70-SSC / P10-70-SSC-D02

NTI AG / LinMot

8 Storage, transport, installation altitude

•

Sliders are to be stored and transported only in the plastic containers (with cardboard inlay) provided for
this purpose, or already installed and secured in LinMot P stators.

•

Remove the slider from this plastic containers only for assembling.

•

The storage area must be dry, dust-free, frost-free and vibration-free.

•

The relative air humidity should be less than 60 %.

•

Prescribed storage temperature: -

15 °C…70 °C

•

The motor must be protected against extreme weather conditions.

•

The air in the storage area must not contain any harmful gases.

•

The max. installation altitude is 2'000 m (for higher values contact LinMot) above sea level.

•

From 1'000 m, derating of 1 °C per 100 m is to be considered for air cooling.

9 Dimensions

Stator

9.1.1 P10-70x160U-BD-SSC

Summary of Contents for P10-70-SSC Series

































Search results

Summary of Contents for P10-70-SSC Series

Reviews:

Related manuals for P10-70-SSC Series

Brands by name

Popular brands

LinMot P10-70-SSC Series, Installation Manual

Search results

Summary of Contents for P10-70-SSC Series

Reviews:

Related manuals for P10-70-SSC Series

Brands by name

Popular brands