Linktop Otoscope NE20, User Manual

Page: 14 / 19

10. Electromagnetic Compatibility
The Otoscope has been tested and found to comply with the
electromagnetic compatibility (EMC) limits for medical devices.
These limits are designed to provide reasonable protection
against harmful interference in a typical medical installation.
a) Do not use a mobile phone or other devices that emit
electromagnetic fields, near the unit. This may result in
abnormal operation of the unit.
b) Caution: This unit has been thoroughly tested and inspected to
assure proper performance and operation!
c) Caution: this machine should not be used adjacent to or
stacked with other equipment and that if adjacent or stacked
use is necessary, this machine should be observed to verify
normal operation in the configuration in which it will be used.
The Otoscope is intended for use in the electromagnetic
environments specified below. The customer or the user of
the Otoscope should assure that it is used in such an
environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Group 1
Class B
Harmonic
emissions
IEC 61000-3-2
Voltage function
/flicker emissions
IEC 61000-3-3
Not
applicable
Not
applicable
The Otoscope use RF energy
only for its internal function.
Therefore, its RF emissions
are very low and are not likely
to cause any interference in
nearby electronic equipment.
The Otoscope is suitable for
use in all establishments,
including domestic
establishments and those
directly connected to the
public low-voltage power
supply network that supplies
buildings used for domestic
purposes.
Compliance
Electromagnetic environment
- guidance
Manufacturer’s declaration – electromagnetic emissions