6
Chapter 3: Getting to Know the Wireless-G Broadband Router
The Back Panel
Wireless-G Broadband Router
Chapter 3: Getting to Know the Wireless-G Broadband Router
The Back Panel
The Broadband Router's ports, where the cables are connected, are located on the back panel.
Reset Button
There are two ways to reset the Broadband Router's factory defaults. Either press the
Reset
Button
, for approximately ten seconds, or restore the defaults from the Password tab in the
Broadband Router's Web-Based Utility.
Internet
The
Internet
port is where you will connect your broadband Internet connection.
1, 2, 3, 4
These ports (1, 2, 3, 4) connect the Broadband Router to your networked PCs and other
Ethernet network devices.
Power
The
Power
port is where you will connect the power adapter.
Important:
Resetting the Broadband Router
will erase all of your settings (WEP Encryption,
Wireless and LAN settings, etc.) and replace
them with the factory defaults. Do not reset
the Broadband Router if you want to retain
these settings.
Figure 3-1: The Broadband Router’s Back Panel
