Chapter 3
Advanced Configuration
21
Wireless-G Broadband Router
Ping Test
Traceroute Test
Traceroute
To test the performance of a connection,
click
Traceroute
to open the
Traceroute Test
screen. Enter
the address of the PC whose connection you wish to test
and click
Traceroute
. The
Traceroute Test
screen will show
if the test was successful. To stop the test, click
Stop
. Click
Clear Log
to clear the screen. Click
Close
to return to the
Diagnostics
screen.
Traceroute Test
Administration > Factory Defaults
The
Administration > Factory Defaults
screen allows you
to restore the Router’s configuration to its factory default
settings.
Factory Defaults
Restore Factory Defaults
To reset the Router’s settings
to the default values, select
Yes
, and then click
Save
Settings
. Any settings you have saved will be lost when
the default settings are restored.
Administration > Factory Defaults
Administration > Upgrade Firmware
The
Administration > Upgrade
Firmware
screen allows
you to upgrade the Router’s firmware. Do not upgrade
the firmware unless you are experiencing problems with
the Router or the new firmware has a feature you want
to use.
Administration > Upgrade Firmware
Before upgrading the firmware, download the Router’s
firmware upgrade file from the Linksys website,
www.linksysbycisco.com
.
Upgrade Firmware
Please select a file to upgrade
Click
Browse
and select
the firmware upgrade file. Then click
Upgrade
and follow
the on-screen instructions.
Administration > Config Management
This screen is used to back up or restore the Router’s
configuration file.
Administration > Config Management
Backup Configuration
To back up the Router’s configuration file, click
Backup
.
Then follow the on-screen instructions.
