Dual-Band Wireless A/G Broadband Router
The Internet Indicators
Link/Act
Green
. The
Link/Act
LED lights up when a successful con-
nection is made between the Router and your cable or DSL
modem (the Internet). The
Link/Act
LED flickers when the
Router is sending or receiving data over the
Internet
port.
Full/Col
Green
. The
Full/Col
LED serves two purposes. If this LED
is lit up solidly, the connection made through the correspon-
ding port is running in full duplex mode. If the LED flickers,
the connection is experiencing collisions (when two PCs
send data at the same time). Infrequent collisions are normal.
100
Orange
. The
100
LED lights up when a successful 100Mbps
connection is made through the corresponding port.
If this LED does not light up, then your connection speed is
10Mbps.
Proceed to “Chapter 3: Connect the Router.”
9
8
The WLAN Indicators
Link
Green
. When the
Link
LED is continuously lit, the wireless
network is available.
The LAN Indicators
Link/Act
Green
. The
Link/Act
LED serves two purposes. If the LED
is continuously lit, the Router is successfully connected to a
device through the corresponding port. If the LED is flicker-
ing, the Router is actively sending or receiving data over that
port.
Full/Col
Green
. The
Full/Col
LED also serves two purposes. If this
LED is lit up solidly, the connection made through the corre-
sponding port is running in full duplex mode. If the LED
flickers, the connection is experiencing collisions (when two
PCs send data at the same time). Infrequent collisions are
normal.
100
Orange
. The
100
LED lights up when a successful 100Mbps
connection is made through the corresponding port.
If this LED does not light up, then your connection speed is
10Mbps.
