manualshive.com logo in svg

Linksys WRP200, User Manual

Share
Download
Linksys WRP200 User Manual Download Page 85

79

Appendix I: Contact Information

Wireless-G Broadband Router with 2 Phone Ports

Appendix I: Contact Information

Need to contact Linksys?
Visit us online for information on the latest products and updates 
to your existing products at:

http://www.linksys.com or 
ftp.linksys.com

Can't find information about a product you want to buy
on the web? Do you want to know more about networking
with Linksys products? Give our advice line a call at:

800-546-5797 (LINKSYS)

Or fax your request in to:

949-823-3002

If you experience problems with any Linksys product,
you can call us at:

800-326-7114

Don't wish to call? You can e-mail us at:

[email protected]

If any Linksys product proves defective during its warranty period,
you can call the Linksys Return Merchandise Authorization
department for obtaining a Return Authorization Number at:

949-823-3000

(Details on Warranty and RMA issues can be found in the Warranty
Information section in this Guide.)

Summary of Contents for WRP200






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands