manualshive.com logo in svg

Linksys WRP200, User Manual

Share
Download
Linksys WRP200 User Manual Download Page 45

39

Chapter 5: Configuring the Router
The Administration Tab - Firmware Upgrade

Wireless-G Broadband Router with 2 Phone Ports

The Administration Tab - Firmware Upgrade

The 

Firmware Upgrade

 screen allows you to upgrade the Router’s firmware. Do not upgrade the firmware unless 

you are experiencing problems with the Router or the new firmware has a feature you want to use.

Before upgrading the firmware, download the Router’s firmware upgrade file from the Linksys website, 

www.linksys.com

. Then extract the file.

Upgrade Firmware

Please select a file to upgrade

. In the field provided, enter the name of the extracted firmware upgrade file, or 

click the 

Browse

 button to find this file.

Upgrade

. After you have selected the appropriate file, click the 

Upgrade

 button, and follow the on-screen 

instructions.

Figure 5-38: Administration Tab - Firmware Upgrade

download

: to receive a file transmitted over a network.

firmware

: the programming code 

that runs a networking device.

upgrade

: to replace existing software or 

firmware with a newer version.

NOTE:

 The Router will lose all of the settings you have customized. Before you upgrade its firmware, 

write down all of your custom settings. After you upgrade its firmware, you will have to re-enter all 
of your configuration settings.

NOTE:

Depending on your Internet phone service provider’s policies, you may not be able to upgrade 

the Router’s firmware. For more information, contact your Internet phone service provider.

Summary of Contents for WRP200






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands