Linksys WAP54G v2 User Manual Download Page 44

Page: 44 / 70

Chapter 7: Configuring the Wireless-G Access Point
The Setup Tab

Wireless-G Access Point

Wireless Repeater

- When set to Wireless Repeater mode, the Wireless Repeater is able to talk to one remote

access point within its range and retransmit its signal. (This feature only works with Linksys WAP54G and
WRT54G.)

To configure a Wireless Repeater environment, click

Wireless Repeater

and enter the LAN MAC address of the

remote access point in the Remote AP MAC Address field.

Wireless Bridge

- If you are trying to make a wireless connection between two wired networks,

select Wireless

Bridge

. This mode connects two physically separated wired networks with two access points.

To configure a Wireless Bridge environment, click

Wireless Bridge

and enter the LAN MAC address of the

remote access point in the Remote Bridge MAC Address field. The remote access point also needs to be set up as
a Wireless Bridge.

Click the

Save Changes

button to apply your changes or

Cancel Changes

to cancel your changes. If you require

online help, click the

Help

button.

IMPORTANT:

In Wireless Bridge mode, the Access

Point can ONLY be accessed by another access point
in Wireless Bridge mode. In order for your other
wireless devices to access the Access Point, you
must reset it to Access Point mode. The two modes
are mutually exclusive.

Figure 7-10: Wireless Repeater diagram

NOTE:

All devices on each wired network must be

connected through a hub or switch.

Figure 7-11: Wireless Bridge diagram

Summary of Contents for WAP54G v2







































































Search results

Summary of Contents for WAP54G v2

Reviews:

Related manuals for WAP54G v2

Brands by name

Popular brands

Linksys WAP54G v2, User Manual

Search results

Summary of Contents for WAP54G v2

Reviews:

Related manuals for WAP54G v2

Brands by name

Popular brands