Linksys WAP54G v2 User Manual Download Page 36

Page: 36 / 70

Chapter 7: Configuring the Wireless-G Access Point
Navigating the Utility

Wireless-G Access Point

Navigating the Utility

There are four main tabs: Setup, Status, Advanced, and Help. Additional screens will be available from the main
tabs.

Setup

•

Basic Setup

. Enter the Internet connection and network settings on this screen.

•

Password

. Change the Access Point’s Password and change its settings back to their defaults from this

screen.

•

AP Mode

. From this screen, you can configure how the Access Point will work with other access points in

your network.

•

Log

. You can view or save, even email, activity logs from this screen.

Status

•

This screen will display current information on the Access Point, its settings, and its performance.

Advanced

•

Filters

. From this screen, you can allow or prevent access to your network.

•

Advanced Wireless

. From this screen, you can configure the Access Point’s more advanced wireless settings.

•

SNMP

. This screen allows you to customize the Simple Network Management Protocol (SNMP) settings.

Help

•

For help on the various tabs in this Web-based Utility, go to this screen.

firmware:

the programming code that runs a

networking device

snmp:

the standard e-mail protocol on the Internet

Summary of Contents for WAP54G v2







































































Search results

Summary of Contents for WAP54G v2

Reviews:

Related manuals for WAP54G v2

Brands by name

Popular brands

Linksys WAP54G v2, User Manual

Search results

Summary of Contents for WAP54G v2

Reviews:

Related manuals for WAP54G v2

Brands by name

Popular brands