Linksys WAP54G v2 User Manual Download Page 35

Page: 35 / 70

Chapter 7: Configuring the Wireless-G Access Point
Overview

Wireless-G Access Point

Chapter 7: Configuring the Wireless-G Access Point

Overview

The Access Point has been designed to be functional right out of the box, with the default settings in the Setup

Wizard. However, if you'd like to change these settings, the Access Point can be configured through your web

browser with the Web-Based Utility. This chapter explains how to configure the Access Point in this manner.

For your convenience, use the Access Point’s Web-based Utility to administer it. This chapter will explain all of

the functions in this Utility. The Utility can be accessed via Microsoft Internet Explorer or Netscape Navigator

through use of a computer connected with an Ethernet cable to the Access Point.

For a basic network setup, most users only have to use the following screens of the Utility:

•

Basic Setup
On the

Basic Setup

screen, enter your basic network settings here.

•

Password
Click the

Setup

tab and then select the

Password

screen. The Access Point’s default password is

admin

. To

secure the Access Point, change the Password from its default.

Have You:

Enabled TCP/IP on your PCs? PCs

communicate over the network with this
protocol. Refer to Appendix D: Windows Help
for more information on TCP/IP.

Note:

The Access Point is designed to function

properly after using the Setup Wizard. This
chapter is provided solely for those who wish
to perform more advanced configuration or
monitoring.

browser:

an application that provides a way to look at and

interact with all the information on the World Wide Web.

Summary of Contents for WAP54G v2







































































Search results

Summary of Contents for WAP54G v2

Reviews:

Related manuals for WAP54G v2

Brands by name

Popular brands

Linksys WAP54G v2, User Manual

Search results

Summary of Contents for WAP54G v2

Reviews:

Related manuals for WAP54G v2

Brands by name

Popular brands