Chapter3
Advanced Configuration
1
Wreless-N ADSL2+ Gateway
Wireless-B networking only, select Standard - 20MHz
Channel.
NOTE:
If you select Wide - 40MHz Channel for
the Radio Band setting, then Wirelss-N can use
two channels: a primary one (Wide Channel)
and a secondary on (Standard Channel). This will
enhance Wireless-N performance..
Wde Channel
If you selected Wide - 40MHz Channel for
the Radio Band setting, then this setting will be available
for your primary Wireless-N channel. Select any channel
from the drop-down menu.
Standard Channel
Select the channel for Wireless-N,
Wireless-G, and Wireless-B networking. If you selected
Wide – 40MHz Channel for the Radio Band setting, then
the Standard Channel will be a secondary channel for
Wireless-N. If you are not sure which channel to select, do
not make any changes.
Wreless SSID Broadcast
When wireless devices survey
the local area for wireless networks to associate with, they
will detect the wireless network name or SSID broadcast
by the Gateway. If you want to broadcast the Gateway’s
SSID, keep the default,
Enable
. Otherwise, select
Dsable
.
Click
Save Settngs
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Wireless > Wireless Security
The
Wireless Security
screen configures the security of your
wireless network(s). The following wireless security mode
options are supported by the Gateway: WPA2-Personal,
WPA Personal, WPA2-Enterprise, WPA Enterprise, RADIUS,
and WEP. WPA (Wi-Fi Protected Access), is a security
standard stronger than WEP (Wired Equivalent Privacy)
encryption. WPA2 is a more advanced, more secure version
of WPA. WPA-Enterprise, WPA2-Enterprise, and RADIUS use
a RADIUS (Remote Authentication Dial-In User Service)
server for authentication. For detailed instructions on
configuring wireless security for the Gateway, refer to
“Chapter 2: Wireless Security”.
Wireless Security
Securty Mode
Select the security method for your
wireless network. Proceed to the appropriate instructions.
If you do not want to use wireless security, keep the
default,
Dsabled
.
NOTE:
If you are using wireless security,
remember that each device in your wireless
network MUST use the same security method
and settings, or else the wireless devices cannot
communicate.
WPA2-Personal (Recommended)
Security Mode > WPA2-Personal
Encrypton
The method is
TKIP
or
AES
.
Passphrase
Enter a Passphrase (also called a WPA shared
key) of 8-63 characters.
Key Renewal
Enter a Key Renewal period, which instructs
the Gateway how often it should change the encryption
keys. The default is
300
seconds.
WPA-Personal (May affect wireless performance. WPA2
recommended)
Security Mode > WPA-Personal
Encrypton
The method is
TKIP
or
AES
.
Passphrase
Enter a Passphrase (also called a WPA shared
key) of 8-63 characters.
Key Renewal
Enter a Key Renewal period, which instructs
the Gateway how often it should change the encryption
keys. The default is
300
seconds.
WPA2-Enterprise
WPA2-Enterprise features WPA2 used with a RADIUS
server. (This method should only be used when the device
is connected to a RADIUS server.)
