Chapter
Configuring the Switch
48
24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet
SNMP > Notification Recipient
SNMP > Notification Recipient
Recpent IP
IP address of a new management station to
receive notification messages .
Notfcaton Type
Notifications are sent as traps or inform
messages . The informs option is only available for version
2c and 3 hosts . (Default:
Traps are used
)
SNMPv1,2
Communty Strng
Specifies a valid community string
for the new trap manager entry . (Range: 1-32 characters,
case sensitive)
Notfcaton Verson
Indicates if the user is running
SNMP v1 or v2c . (Default:
v1
)
SNMPv3
User Name
The name of user connecting to the SNMP
agent . (Range: 1-32 characters)
Securty Level
When trap version 3 is selected, you
must specify one of the following security levels . (Default:
noAuthNoPrv
)
noAuthNoPrv
There is no authentication or encryption
used in SNMP communications . (This is the default for
SNMPv3 .)
AuthNoPrv
SNMP communications use authentication,
but the data is not encrypted (only available for the SNMPv3
security model) .
AuthPrv
SNMP communications use both authentication
and encryption (only available for the SNMPv3 security
model) .
•
•
•
UDP Port
Specifies the UDP port number used by the
trap manager .
Tmeout
The number of seconds to wait for an
acknowledgment before resending an inform message .
(Range: 0-2147483647 centiseconds; Default:
100
centseconds
)
Retry tmes
The maximum number of times to resend
an inform message if the recipient does not acknowledge
receipt . (Range: 0-255; Default:
)
Admin
The Admin tab provides access to system administration
settings and tools . It includes the following screens:
Admin > User Authentication
Admin > User Authentication
The Switch supports up to 6 user names and passwords
for management access (console and web interfaces) .
The default user name is “
admn
” with no password . You
should therefore assign a new password for the “admin”
user account and store it in a safe place . The default
“admin” account cannot be deleted from the system .
As well as the default “
admn
” account, up to five other
user-defined accounts can be created on the Switch . To
create a new user account, enter a user name and password
up to eight characters long, confirm the password, and
then click
Add
.
To change the password for a specific user, select the user
name from the list, enter the new password, confirm the
password by entering it again, and then click
Update
.
