10
Configuration Using the Console Interface
24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet
Chapter 4
You can add up to five user accounts in addition to the
default admin account . The admin account cannot be
deleted from the system .
To save the new user account information, use the
arrow
keys
to select
Save
and press
Enter
.
IP Configuration
The
IP Configuration
screen displays four menu choices:
IP Address Settings, HTTP/HTTPS, SNMP, and Network
Diagnostics .
IP Configuration
IP Address Settings
The
IP Address Settings
screen allows you to set the IP
information for the Switch .
IP Address Configuration
IP Address
This sets the Switch’s IP Address . The default
setting is 192 .168 .1 .5 .
Subnet Mask
This combined with the IP Address defines
the Switch’s network address .
Default Gateway
This defines the IP Address for the
default gateway of the network .
Management VLAN
Set the ID number of the
Management VLAN . This is the only VLAN through which
you can gain management access to the Switch . By
default, all ports on the Switch are members of VLAN 1,
so a management station can be connected to any port
on the Switch . However, if other VLANs are configured
and you change the Management VLAN, you may lose
management access to the Switch . In this case, you should
reconnect the management station to a port that is a
member of the Management VLAN .
WARNING:
Do not define the Management
VLAN as a VLAN that has yet to be created . If
the VLAN does not exist already, the software
will automatically create the VLAN but will not
assign VLAN membership . If this happens, the
Switch cannot be managed via the web-based
utility until it has been reconfigured via the
console interface .
IP Mode
Choose to have either a user-defined IP address
or to have it assigned by DHCP or BOOTP .
HTTP/HTTPS
The
HTTP/HTTPS
screen allows you to set the Hyper Text
Transfer Protocol server (web server) information for the
Switch .
HTTP/HTTPS
HTTP Server
Enable or disable the Switch’s HTTP server
function .
HTTP Server port
Set the TCP port that HTTP packets are
sent and received from .
HTTPS Server
Enable or disable the Secure HTTP server
function of the Switch .
HTTPS Server port
Set the TCP port that the HTTPS
packets are sent and received from .
SNMP
The
SNMP
screen allows you to set the Switch’s SNMP
settings .
