E
Verify that your PC is now connected to the internet. You can do this
by launching a web brower and entering
www.mynetfone.com.au
in the address field.
Register with MyNetFone
If you purchase the adaptor from MyNetFone website, the registration
will have been done online at the time of your purchase.
By registering and completing the Service Registration Form below, you’ll
be able to select the service option that best suits your individual needs:
www.mynetfone.com.au/register
Call your friend
Making a phone call with MyNetFone service is no different from any
other calls that you make every day.
Just dial the normal phone number and your call will be connected.
To make a free call to another MyNetFone user, simply dial their
MyNetFone number (09xx xxxx).
NEED HELP?
We realise it’s not always smooth sailing. As with any new services you
may encounter some questions or problems. Check out our FAQ section
on our website first:
www.mynetfone.com.au/faq
If you still have questions, please do not hesitate to call our national
Customer Care Centre, on:
1300 731 048
When you call, please make sure you’re next to your computer with your
broadband Internet connected in order for our staff to assist straight
away. Alternatively, you can send an email to our support team:
We’ll get back to you as soon as possible!
This section explains how to use the Interactive Voice Response Menu to
configure the ATA’s network settings. You will use the telephone’s keypad to
enter your commands and select choices, and the ATA will use voice
responses.
To access the Interactive Voice Response Menu:
A
Use a telephone connected to the PHONE port of the ATA (You can
only access the Interactive Voice Response Menu through an
analogue telephone, not any of the Internet phones.)
B
Press *
**** (in other words, press the star key four times).
C
Wait until you hear the “Linksys configuration menu—please enter the
option followed by the # (pound) key or hang up to exit” response.
D
Refer to the following table that lists actions, commands, menu
choices, and descriptions. After you select an option, press the #
#
(pound) key. To exit the menu, hang up the telephone.
While entering a value, such as an IP address, you may exit without entering
any changes. Press the *
* (star) key twice within half a second. Otherwise,
the * will be treated as a decimal point or dot.
After entering a value, such as an IP address, press the #
# (pound) key to
indicate you have finished your selection. To save the new setting, press 1
1.
To review the new setting, press 2
2. To re-enter the new setting, press 3
3. To
cancel your entry and return to the main menu, press *
* (star).
For example, to enter the IP address
191.168.1.105
by keypad, press these
keys: 1
191*168*1*105. Press the #
# (pound) key to indicate that you have
finished entering the IP address. Then press 1
1 to save the IP address or press
the *
* (star) key to cancel your entry and return to the main menu.
If the menu is inactive for more than one minute, the ATA will time out.
You will need to re-enter the menu by pressing ****.
Using the Interactive Voice
Response Menu
Using the Interactive Voice Response Menu
The settings you have saved will take effect after you hang up the
telephone. The Phone Adapter may reboot at this time.
Interactive Voice Response Menu
Action
Command
Choices
Description
Enter Interactive Voice
Response Menu
****
Use this command to enter the
Interactive Voice Response Menu. Do not
press any other keys until you hear,
“Linksys configuration menu. Please
enter the option followed by the #
(pound) key or hang up to exit.”
Check Internet
Connection Type
100
Hear the Internet connection type of the
Phone Adapter.
Check Internet IP
Address
110
Hear the IP address assigned to the
Phone Adapter’s Internet (external)
interface.
Check Network Mask
(or Subnet Mask)
120
Hear the network or subnet mask
assigned to the Phone Adapter.
Check Gateway IP
Address
130
Hear the IP address of the Phone Adapter
(usually the network router).
Check MAC Address
140
Hear the MAC address of the Phone
Adapter in hexadecimal string format.
Check Firmware
Version
150
Hear the version number of the firmware
running on the Phone Adapter.
Check Primary DNS
Server IP Address
160
Hear the IP address of the primary DNS
(Domain Name Service) server.
Check Internet Web
Server Port
170
Hear the port number of the Internet Web
server used for the Web-based Utility.
Check Local IP
Address
210
Hear the local IP address of the Phone
Adapter.
Set Internet
Connection Type
101
DHCP - Press
0
.
Static IP -
Press
1
.
PPPoE - Press
2
.
Select the type of Internet connection
you are using. Refer to the
documentation supplied by your Internet
Service Provider (ISP).
Factory Reset
73738
Confirm -
Press
1
.
Cancel - Press
*
(star).
This feature may be protected by a
password available only from your ITSP.
If necessary, enter the password*. The
Phone Adapter will request confirmation;
enter
1
to confirm. You will hear, “Option
successful.” Hang up the phone. The
Phone Adapter will reboot, and all
settings will be reset to their defaults.
User Factory Reset
877778
Confirm -
Press
1
.
Cancel - Press
*
(star).
The Phone Adapter will request
confirmation; enter
1
to confirm. You will
hear, “Option successful.” Hang up the
phone. The Phone Adapter will reboot
and all user-configurable settings will be
reset to their factory default settings.
Interactive Voice Response Menu
Action
Command
Choices
Description
SPA2102-QI-60613A DF
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2006
Cisco Systems, Inc. All rights reserved.
Set Static IP Address
111
First, set the Internet Connection Type to
static IP address; otherwise, you will
hear, “Invalid Option,” if you try to set the
static IP address. Use the * (star) key
when entering a decimal point.
Set Network (or
Subnet) Mask
121
First, set the Internet Connection Type to
static IP address; otherwise, you will
hear, “Invalid Option,” if you try to set the
network or subnet mask. Use the * (star)
key when entering a decimal point.
Set Gateway IP
Address
131
First, set the Internet Connection Type to
static IP address; otherwise, you will
hear, “Invalid Option,” if you try to set the
gateway IP address. Use the * (star) key
when entering a decimal point.
Set Primary DNS
Server IP Address
161
First, set the Internet Connection Type to
static IP address; otherwise, you will
hear, “Invalid Option,” if you try to set the
IP address of the primary DNS server.
Use the * (star) key when entering a
decimal point.
Set the Mode
201
Router/NAT
Mode - Press
0
.
Bridge/Switch
Mode - Press
1
.
If the Phone Adapter acts as the router
for your network, use the router/NAT
mode.
If your network already has a router, use
the bridge/switch mode.
Enable/Disable WAN
Access to the
Web-based Utility
7932
Enable -
Press
1
.
Disable -
Press
0
.
Use this setting to enable or disable WAN
access to the Web-based Utility. (This
Utility lets you configure the Phone
Adapter.)
Manual Reboot
732668
After you hear, “Option successful,” hang
up the phone. The Phone Adapter will
automatically reboot.
Interactive Voice Response Menu
Action
Command
Choices
Description
* Follow these instructions to enter
the password.
• A, B, C, a, b, or c — press 2
2.
• D, E, F, d, e, or f — press 3
3.
• G, H, I, g, h, or i — press 4
4.
• J, K, L, j, k, or l — press 5
5.
• M, N, O, m, n, or o — press 6
6.
• P, Q, R, S, o, q, r, or s — press 7
7.
• T, U, V, t, u, or v — press 8
8.
• W, X, Y, Z, w, x, y, or z — press 9
9.
• All Other Characters — press 0
0.
For example, to enter the
password
phone@321
by
keypad, press these keys:
746630321. Then press the #
#
(pound) key to indicate that you
have finished entering the
password. To cancel your entry
and return to the main menu,
press *
* (star).
For additional information or troubleshooting
help, refer to the User Guide, which is
available on the Linksys website. Contact
your Internet Telephony Service Provider for
further support.
Linksys Website
http://www.linksys.com or
http://www.linksys.com/support
3
