![background image](http://html.mh-extra.com/html/linksys/spa2002/spa2002_user-manual_1923908007.webp)
3
Chapter 2: Getting to Know the Phone Adapter
Back Panel Ports and LEDs
Analog Telephone Adapter with 2 FXS Ports
Chapter 2: Getting to Know the Phone Adapter
Back Panel Ports and LEDs
The Phone Adapter’s ports and LEDs are located on the back panel.
PHONE 1
Port
The
PHONE 1
port (for your primary Internet phone line) allows you to connect your telephone
to the Phone Adapter using an RJ-11 telephone cable (not included).
PHONE 2
Port
If you have a second Internet phone service account, use the
PHONE 2
port to connect a
second telephone (or fax machine) to the Phone Adapter using an RJ-11 telephone cable (not
included).
ETHERNET
Port
The
ETHERNET
port allows you to connect the Phone Adapter to your router or gateway using
a Category 5 (or better) Ethernet network cable.
POWER
Port
The
POWER
port is where you connect the included power adapter.
STATUS
LED
The
STATUS
LED remains solid green when the Phone Adapter is powered on and ready. It
flashes green when the Phone Adapter is booting up, undergoing a self-test, or performing
a firmware upgrade.
ACT
LED
The
ACT
LED remains solid yellow when the Phone Adapter is connected to your network
through the Ethernet port. It flashes yellow when data is being sent or received through the
Ethernet port.
Figure 2-1: Back Panel
NOTE:
The Phone ports do not carry any voltage.