Linksys RT41-BU User Manual Download

Page: 40 / 71

Chapter 5: Configuring the Router
The Status Tab - Router

Wired Broadband Router

The Status Tab - Router

The

Router

screen displays information about the Router and its current settings.

Router Information

Current Firmware Version

. This shows the version and date of the firmware that is currently installed.

Previous Firmware Version

. This shows the version and date of the firmware that was previously installed.

Current Time

. The current time and date are displayed here.

MAC Address

. The MAC Address of the Router’s Internet interface is displayed here.

Router Name

. This shows the name you have assigned to the Router.

Host Name

. The Host Name for the Router is shown here.

Domain Name

. The Domain Name for the Router is displayed here.

Internet

Configuration Type

Login Type

. This indicates the type of Internet connection you are using.

Login Status

. For these dial-up style connections, PPPoE and PPTP, the status of the connection is displayed, and

there is a Connect button to click if there is no connection and you want to establish an Internet connection.

IP Address

. The Router’s Internet IP Address is displayed here.

Subnet Mask and Default Gateway

. The Router’s Subnet Mask and Default Gateway address are shown here.

DNS 1-2

. Shown here are the DNS (Domain Name System) IP addresses currently used by the Router.

DHCP Release

. Available for a DHCP connection, click the

DHCP Release

button to release the current IP address

of the device connected to the Router’s Internet port.

DHCP Renew

. Available for a DHCP connection, click the

DHCP Renew

button to replace the current IP

address—of the device connected to the Router’s Internet port—with a new IP address.

Click the

Refresh

button to update the on-screen information. For help information, click

Help

Figure 5-30: Status Tab - Router

NOTE:

The on-screen information will vary

depending on the Internet Connection Type selected
on the

Setup

screen.

Summary of Contents for RT41-BU








































































Search results

Summary of Contents for RT41-BU

Reviews:

Related manuals for RT41-BU

Brands by name

Popular brands

Linksys RT41-BU, User Manual

Search results

Summary of Contents for RT41-BU

Reviews:

Related manuals for RT41-BU

Brands by name

Popular brands